01Wet rooms
Fan on, fan off later.
Run the exhaust fan during every shower and 20 minutes after.
Steam is what feeds mould.
Test. Clean. Protect.
Our Services.
From initial testing to ongoing maintenance, every service uses 100% natural SAN-AIR technology. No bleach, no harsh chemicals, just science-backed solutions that last.
Free PDF, eight habits + a weekly checklist.
Moisture & Relative Humidity Testing
Professional moisture and relative humidity testing to identify exactly where the problem is, unsighted moisture readings, targeted checks of high-risk areas, and clear results you can see.
Meter Reading
Dry
Medium
Wet
What's Included
Unsighted moisture readings across walls, floors, and ceilings
Relative humidity testing throughout the property
Targeted checks of high-risk and problem areas
Moisture mapping to locate hidden water sources
Detailed report with findings and recommended treatment plan
Surface Mould Removal
SAN-AIR Surface Spray and Wipes kill mould down to the root system without releasing harmful mycotoxins. No bleach. No harsh chemicals.
What's Included
Full surface treatment with SAN-AIR spray
Root-level mould elimination in porous materials
Safe for all surfaces, walls, ceilings, tiles, grout, timber
No toxic residues left behind
Safe for families and pets during and after treatment
Air Purification & Filtration
Commercial-grade air filtration combining carbon and HEPA filtration with SAN-AIR Aerosperse™ technology for instant room-by-room purification.
What's Included
Commercial-grade air filtration with carbon and HEPA integration
15-minute room purification with instant results
Kills airborne viruses, bacteria, and mould spores on contact
Combines with surface remediation for complete decontamination
Aerosperse™ gel for ongoing 24/7 protection between services
Commercial Grade Fogging
For severe infestations. Commercial-grade fogging disperses SAN-AIR throughout enclosed spaces, delivering instant room-by-room remediation on contact.
What's Included
Full-room aerosol dispersal of SAN-AIR technology
Penetrates wall cavities, HVAC systems, and sub-floor areas
Instant contact kill of mould spores and bacteria
Ideal for severe or widespread contamination
Combined with air filtration for complete decontamination
Commercial Grade Vacuum Extraction
Controlled wet and dry source removal using H-Class filtration, with containment to help limit cross-contamination during post-treatment cleanup.
What's Included
ASA 30 H PC H-Class wet and dry vacuum extraction
H-Class filtration for very fine hazardous mould and dust
Contained source removal to help reduce cross-contamination
Wet and dry recovery matched to site conditions
Post-treatment cleanup with automatic filter cleaning for consistent suction
Good to know
Vacuuming removes and contains mould; it does not kill it. Effective remediation still needs the right antimicrobial, steam or fogging treatment, plus thorough drying.
H-Class performance depends on using the correct filters, collection bags, and other consumables for the material and task.
A HEPA air scrubber is not an H-Class vacuum: the vacuum removes contamination at the source, while the air scrubber captures particles already airborne.
Ongoing Maintenance Programs
Prevention is better than cure. Our maintenance programs provide continuous protection with regular retreatment, monitoring, and priority emergency response.
What's Included
Scheduled retreatment visits (quarterly or as needed)
Regular air quality monitoring and reporting
Aerosperse™ gel replenishment and placement optimisation
Priority booking for emergency call-outs
Ongoing recommendations for ventilation and moisture management
Commercial & Strata Solutions
Scalable solutions for property managers, strata companies, commercial buildings, and multi-unit portfolios across NSW, QLD, VIC & ACT.
What's Included
Portfolio-wide mould risk assessment
Building-wide treatment of common areas and individual units
Strata-compliant documentation and reporting
Dedicated account management for multi-property clients
Customised maintenance schedules for each building
Mattress Cleaning & Sanitisation
UV-C sanitised, dry cleaned, and enzyme treated. We lift out dust mites, dead skin, and the allergens they feed on, then kill bacteria, viruses, and mould spores on the surface. No water, no steam, no chemicals. Available as an add-on to any of our services.
What's Included
Dry clean: sealed HEPA vacuum extraction of dust mites, dead skin, and debris
Non-toxic enzyme treatment that breaks down the allergens dust mites feed on
UV-C sanitising pass that kills bacteria, viruses, and mould spores on the surface
Completely dry, with no water, no steam, and no drying time
Available as an add-on to any service we run, or as a standalone booking
Suitable for single, double, queen, and king mattresses
Eco Drain & Urinal Services
Seal commercial floor wastes and urinals against sewer odours, insects, and harmful gases. The drain still drains. Site walkthrough, install, and ongoing monthly maintenance.
What's Included
Site walkthrough plus initial bioactive drain treatment
Eco Drain seals sized to your floor wastes and urinals
Industry-leading flow rates, sizing matched to each fixture so drainage isn't restricted
HCAAP-accredited install and ongoing maintenance program
Grease trap odour treatment where required
Ongoing monthly drain maintenance program
Holds the seal with no standing water, so it keeps working when a conventional trap dries out
Verified blocking of sewer gas and drain flies
For tenants & homeowners
Mould prevention.
Eight small habits. Done most days, they stop mould before it starts. Keep them up and a treated room stays clear.
02Laundry
Keep the door closed.
Shut the laundry door while washing or drying.
Stops wet air moving through the house.
03Clothes drying
Outside or vented only.
Never on racks indoors. Use a vented dryer if the weather is bad.
One indoor load releases litres of water.
04Aircon
Use DRY mode on humid days.
Switch the remote from COOL to DRY when the air feels sticky.
Pulls water out without chilling the room.
05Ventilate
Open up 10am to 2pm.
Open windows top and bottom. On double-hung sash windows, open both sashes.
That is when outside air is driest.
06Winter heat
Electric, not unflued gas.
Avoid unflued gas and kerosene heaters inside the home.
Unflued burners add water to the air.
07Airflow
Keep the air moving.
Leave a ceiling or pedestal fan on low near cold or problem walls.
Still air on cold surfaces is where mould starts.
08Furniture
200mm off outside walls.
Keep beds, sofas and wardrobes away from the wall.
Lets air reach the wall so moisture cannot sit.
Fridge-stickable
Weekly checklist.
Tick each box once a week. If you cannot tick them all, that is where mould will try to start.
- Ran the bathroom fan during and 20 minutes after every shower
- Kept the laundry door closed while washing or drying
- Dried clothes outside or in a vented dryer, not on indoor racks
- Used the aircon in DRY mode on humid days
- Opened windows between 10am and 2pm at least twice this week
- Used electric heat. No unflued gas or kerosene inside
- Ran a fan on low near the coldest wall
- Checked beds and sofas are 200mm off outside walls
- Wiped window sills and cleared window weep holes
- Looked behind curtains and bed heads for first spots
When to call us
- Condensation still on windows after midday. The room is holding too much water. The habits above are the first fix.
- Mould returns within days of cleaning. There is a water source behind the wall and it needs tracing.
The air you breathe matters.
Pureairo
Independently Tested
Lab-verified results.
Every claim is backed by independent laboratory testing. Here are the headline results from our testing program.
Airborne Mould99.9%
Spores that trigger asthma, allergies and respiratory illness
Golden Staph (MRSA)99%
Antibiotic-resistant bacteria found on contaminated surfaces
In 120 minChemsil Consulting (opens in new tab)
SARS-CoV-2 (COVID-19)99.995%
The virus responsible for the COVID-19 pandemic
E. coli & Listeria99.999%
Dangerous bacteria causing food poisoning and infection
In 5 minUNSW Global (opens in new tab)
100% Natural
No bleach. No chemicals. Just science.
Every Pureairo service uses SAN-AIR technology, a 100% natural, Australian-made formulation that eliminates mould, bacteria, and viruses without toxic chemicals. Safe for your family, pets, and the environment.
TGA Accredited
Therapeutic Goods Administration registered
Australian Made
Developed and manufactured in Australia
Family Safe
No toxic residues, safe immediately after use
Proven Effective
Backed by UNSW, Eurofins, and AMS lab testing
What our clients say.
“Since discovering Pureairo, we have stopped using every other mould company in the industry.”
“Their responsiveness is outstanding, always quick to attend to urgent matters and provide detailed reports.”
“We manage over 200 properties and Pureairo handles all our mould issues. Turnaround is fast, exactly what we need.”
Our products for home use
For smaller jobs or ongoing home protection, shop our full SAN-AIR range, sprays, wipes, gels, and mould bombs, at Pure Air Organics.
Not sure which service you need?
Book a free assessment.We'll test your space and recommend the right solution for your situation.